Xi'an Xinyuan Industrial Equipment Co.,Ltd

                               Rosemount 8705-M Flanged flowmeter

Feature :

All flanged sensors are fabricated from stainless and carbon steel and welded to provide a hermetic
seal that protects against moisture and other contaminants. Sizes range from 1/2-in. (15 mm) to
36-in. (900 mm). The sealed housing ensures maximum sensor reliability by protecting all internal
components and wiring from the most hostile environments

Specifications :

1. PTFE available in line sizes:

1/2-in. to 24-in. (15 mm to 600 mm) ASME Class 150, Class 300, Class 600 (derated), and EN 1092-1
30-in. and 36-in. (750 mm and 900 mm) AWWA Class D, ASME Class 150, and MSS SP44 Class 150.
2. Polyurethane available in line sizes:
1-in. to 24-in. (25 mm to 600 mm) ASME Class 150, Class 300, Class 600 (fully rated) and EN 1092-1
30-in. and 36-in. (750 mm and 900 mm) AWWA Class D and MSS SP44 Class 150
1-in. to 16-in. (25 mm to 400 mm) ASME Class 90011
/2-in. to 12-in. (25 mm to 300 mm) ASME Class 1500
Consult Technical Support for ASME Class 2500.
3. Neoprene and Linatex available in line sizes:
1-in. to 24-in. (25 mm to 600 mm) ASME Class 150, Class 300, Class 600 (fully rated) and EN 1092-1
30-in. and 36-in. (750 mm and 900 mm) AWWA Class D, ASME Class 150, and MSS SP44 Class 1501-in. to 12-in. (25 mm to 300 mm) ASME Class 90011/2-in. to 12-in. (25 mm to 300 mm) ASME Class 150011
/2-in. to 8-in. (25 mm to 200 mm) ASME Class 2500.
4. PFA available in line sizes: 1
/2-in. to 12-in. (15 mm to 300 mm) ASME Class 150, Class 300, and EN 1092-1 Flanges

Technical parameters :

14-in. (350 mm) ASME Class 150; not available with coil housing codes M2, M3, or M4.

Products show :

Why chose us :